Mini H1 Bi-xenon projectors 6.1
By far the most popular retrofit projector! Already known for a number of years, he has got his most significant upgrade untill now. The Mini H1 is now better than ever before with a completely resedigned reflector. Compared to previous generations, the light output has increased ny not less than 80%!
By applying a new "dual layer" design in the reflector , the light output has become much better than previous generations. This technique is also used in Acura TL and EvoX - R projectors. Directly below the cutoff is a bright hotspot is clearly visible, and as result of that you have good night vision in the further distance.
What works well shouldn't be changed. Therefore, the projectors still feature a crystal clear lens that generates a super sharp cutoff. The projected DOT cutoff is clearly visible on dark roads. Bi-xenon means that this projector can project both low and high beam. By default, it gives low beam, but once the solenoid is actived by 12 Volts, the projector will give a full high beam.
Also unchanged is the ease of installation . The projectors are still relatively easy to install in H4 and H7 halogen fittings with the supplied adapter plates. Check out our different full HD instructional videos on our YouTube canal!
The earlier generations were all right, but this generation leaves many OEM projector behind them performance wise. All our shrouds can be mounted on this projector . As the name implies, only H1 xenon bulbs (and H1 halogen bulbs) can be used.
Differences compared to the previous versions:
Full compared information? Check out our blog!
Which projector do you recommend for my vehicle? That is a question we often get, which is why we decided to make a database which contains all our vehicle specific knowledge. Follow this link to our database to check your vehicle.Questions about the Mini H1 6.1 Bi - xenon projector? Contact us today!
- 2x Mini H1 6.1 Bi-xenon projectors (low and high beams)
- 2x Shroud
- 2x H7 adapter plates
- 2x H4 adapter plates
- 4x Rubber washers
- 2x Machined Lock rings
- 2 Year full warranty
- Free personal customer support from RFL
|Vehicles||Ideal for H4 and H7 headlights. Also fits 9003, 9006,9007, H11 en H13 headlights|
|Bulbs||Only H1 bulbs|
|Ballast||With AMP connectors (small round connectors, most common)|
|Shrouds||All shrouds we offer|
|Lens diameter||2.5 inch|
allier avec des xénon h1 5500k c'est bluffant
des vraie bi-xénon a moindre coup
Installed these on an R33 Skyline, had to drill a larger hole in the original reflector as the thread of the projector did not fit in the hole. Also there is no other hole available for this particular headlight for the coil wires for the bixenon function so another hole was drilled to get it through.
I'm very happy with the end result.
Los proyectores son excelentes, tienen buena calidad en los materiales y se instalan fácilmente. He mejorado mucho el campo de visión, haciendo mas segura la conducción. El corte del haz de luz es perfecto, con las luces largas se hace de día. Lo recomiendo 100%
Now lets talk about Mini H1 projectors. Before I had some generic H1 from ebay with Morimoto xb35 ballasts and 5000k bulbs. With no hopes I decided to give them a try and the output is just awesome! And the cutoff is really blue and big.
With one of them the cut-off is spot on, in that, you can really see that sharp, blue line, but on the other, its more like an orange-red cutt-off.
With all that said I'm open to that the fault could still be with my car, or maybe that's the way it's meant to be, should they be perfectly symmetrical in all areas? I don't know, I reckon that's my question, and is why I've been so long in getting back to write this review.
With all that said. The spread of the light is impressive and with the solenoid switch, the full beam is up there with the most modern Audi models, IMHO.